| Peak Repetitive Reverse Voltage / Working Peak Reverse Voltage / DC Blocking Voltage | VRRM / VRWM / VR | 40 | V | Single phase, half wave, 60Hz, resistive or inductive load. For capacitive load, derate current by 20%. |
| RMS Reverse Voltage | VR(RMS) | 28 | V | Single phase, half wave, 60Hz, resistive or inductive load. For capacitive load, derate current by 20%. |
| Average Forward Current | IF(AV) | 2.0 | A | Single phase, half wave, 60Hz, resistive or inductive load. For capacitive load, derate current by 20%. |
| Non-Repetitive Peak Forward Surge Current | IFSM | 50 | A | 8.3ms Single Half Sine-Wave Superimposed on Rated Load |
| Power Dissipation (Note 5) | PD | 1.67 | W | Part mounted on 50.8mm X 50.8mm GETEK board with 25.4mm X 25.4mm copper pad, 25% anode, 75% cathode. |
| Power Dissipation (Note 6) | PD | 556 | mW | Part mounted on FR-4 board with 1.8mm X 2.5mm cathode and 1.8mm X 1.2mm anode, 1 oz. copper pads. |
| Thermal Resistance Junction to Ambient (Note 5) | RJA | 60 | C/W | Part mounted on 50.8mm X 50.8mm GETEK board with 25.4mm X 25.4mm copper pad, 25% anode, 75% cathode. |
| Thermal Resistance Junction to Ambient (Note 6) | RJA | 180 | C/W | Part mounted on FR-4 board with 1.8mm X 2.5mm cathode and 1.8mm X 1.2mm anode, 1 oz. copper pads. |
| Thermal Resistance Junction to Soldering (Note 7) | RJS | 5 | C/W | Theoretical RJS calculated from the top center of the die straight down to the PCB cathode tab solder junction. |
| Operating Temperature Range | TJ | -55 to +125 | C | See Figure 4 |
| Storage Temperature Range | TSTG | -55 to +150 | C | |
| Reverse Breakdown Voltage (Note 8) | V(BR)R | 40 | V | IR = 500A |
| Forward Voltage | VF | 0.4 / 0.45 / 0.50 / 0.45 / 0.50 / 0.65 | V | IF = 1.0A / 2.0A / 3.0A |
| Leakage Current (Note 8) | IR | 0.1 / 10 / 0.05 / 5 | mA | VR = 40V / VR = 40V, TJ = +85C / VR = 20V / VR = 20V, TJ = +85C |
| Total Capacitance | CT | 90 | pF | VR = 10V, f = 1.0MHz |
